Ubiquiti Networks' next-generation airMAX® CPE (Customer Premises Equipment) solution, the NanoBeam® 5AC Gen 2 (NBE-5AC-Gen2), combines high performance with a compact and integrated design. This device integrates the radio and antenna into a single housing, achieving maximum gain from the smallest footprint while offering a visually clean and extremely easy-to-install structure. Especially in environments with dense RF signals, its narrow beamwidth blocks or filters interference, providing superior noise immunity and thus a cleaner, more reliable connection. Technically powered by an Atheros MIPS 74Kc 720 MHz processor, 128 MB DDR2 RAM, and 8 MB flash storage, the NanoBeam 5AC Gen 2 features a 19 dBi integrated antenna with dual linear polarization support, delivering impressive performance over long distances. Thanks to airMAX® ac technology, it can achieve 450+ Mbps real TCP/IP throughput and supports flexible channel widths: 10/20/30/40/50/60/80 MHz in PtP mode and 10/20/30/40 MHz in PtMP mode. Additionally, a dedicated Wi-Fi radio for management enables quick and easy setup via the UNMS app on mobile devices. As a use case, the NanoBeam 5AC Gen 2 is an ideal CPE for WISPs (Wireless Internet Service Providers), providing high-speed internet access to each subscriber in PtMP networks, or establishing a reliable PtP bridge between two points. With a range exceeding 15 km and a wide operating temperature range from -40°C to 80°C, it enables uninterrupted, high-performance network infrastructure installation even in harsh outdoor conditions. Technical Specifications: - Model: NBE-5AC-Gen2 - Gain: 19 dBi - Network Interface: 2x 10/100/1000 Ethernet - Processor: Atheros MIPS 74Kc, 720 MHz - Memory: 128 MB DDR2, 8 MB Flash - Max. Power Consumption: 8.5W - Power Supply: 24V, 0.5A Gigabit PoE - Dimensions (with Mount): 189 x 189 x 125 mm - Weight (with Mount): 0.530 kg - Operating Temperature: -40 to 80°C - Wind Resistance: 200 km/h - Channel Widths (PtP): 10/20/30/40/50/60/80 MHz